Title :
Power quality indices: A Saudi steel mill case study
Author :
El-Amin, Ibrahim M. ; Al-Elyani, Abdullah ; Shuaib, Abdelrahman
Author_Institution :
Electr. Eng. Dept., King Fahd Univ. of Pet. & Miner. (KFUPM), Dhahran, Saudi Arabia
Abstract :
This paper presents results of field measurements of power quality indices at the terminals of an Electric Arc furnace connected at 34.5 kV to a 230 kV 60 Hz network in Saudi Arabia. The power quality indices that are measured are total harmonic distortion for voltage and current (THD V, THD I), individual harmonics, and flicker for short and long terms (Pst, Plt). In addition, other electrical parameters are measured as well such as voltage (Vrms), current (Irms), active power (P), reactive power (Q), power factor (PF), and frequency. All power quality parameters for both study cases are found to be within the IEEE and IEC standards. The installation of SVC and filters are mandatory. Long term Monitoring and country wide PQ study is recommended.
Keywords :
IEC standards; IEEE standards; arc furnaces; harmonic distortion; power factor; power harmonic filters; power supply quality; static VAr compensators; steel manufacture; IEC standard; IEEE standard; PQ study; SVC installation; Saudi Arabia; Saudi steel mill case study; THD-I; THD-V; active power; electric arc furnace; field measurements; filter installation; frequency 60 Hz; long-term monitoring; power factor; power quality indices; power quality parameters; reactive power; total harmonic distortion-current; total harmonic distortion-voltage; voltage 34.5 kV to 230 kV; Current measurement; Furnaces; Harmonic analysis; Heating; Power harmonic filters; Power measurement; Power quality; Arc furnace; Harmonic Standards; Harmonic levels; Non-linear Loads; Point of Common Coupling (PCC); Power Quality; flicker;
Conference_Titel :
Computing, Electrical and Electronics Engineering (ICCEEE), 2013 International Conference on
Conference_Location :
Khartoum
Print_ISBN :
978-1-4673-6231-3
DOI :
10.1109/ICCEEE.2013.6633914
