Compressive strength of FRP for insulator

Author

Park, H.Y. ; Kang, D.P. ; Ahn, M.S. ; Lee, T.J. ; Lee, D.I.

Author_Institution

Adv. Electr. Mater. Res. Group, Korea Electrotechnol. Res. Inst., Changwon, South Korea

Volume

2

fYear

2004

Firstpage

812

Abstract

FRP has been used much for core materials of insulator. FRP consists of fiber and plastics (resin and binder). The fiber contributes strength to FRP. The fiber orientation in FRP has a great effect on the strength of FRP because the strength of FRP mainly depends on the strength of fiber. The direction of applied stress of FRP is different from the kinds of insulators. In this study, inner part of FRP rod was made unidirectionally by pultrusion method and outer part of FRP rod was made by filament winding method. Compressive strength and stress of FRP rods were simulated according to the winding orientation of glass fiber. Simulated value and real evaluated compressive strength were compared each other.

Keywords

composite insulators; compressive strength; glass fibre reinforced plastics; internal stresses; polymer insulators; pultrusion; SiO₂; compressive strength; core materials; fiber reinforced plastics; fiber strength; filament winding method; glass fiber; internal stress; pultrusion method; winding orientation; Compressive stress; Dielectrics and electrical insulation; Fiber reinforced plastics; Finite element methods; Glass; Mechanical factors; Numerical simulation; Plastic insulation; Tensile stress; Thermal stresses;

fLanguage

English

Publisher

ieee

Conference_Titel

Solid Dielectrics, 2004. ICSD 2004. Proceedings of the 2004 IEEE International Conference on

Print_ISBN

0-7803-8348-6

Type

conf

DOI

10.1109/ICSD.2004.1350556

Filename

1350556