Title :
Optimized octagonal shaped antenna using split ring design and analysis for wireless communication applications
Author :
Thilagam, J. SalaiThillai ; Manikandan, R. ; Jawahar, P.K.
Author_Institution :
Dept. of Electron. & Commun. Eng., B.S. Abdur Rahman Univ., Chennai, India
Abstract :
This paper proposes an Octagonal shaped planar antenna design and its performance in wireless communication applications by using split ring technique as a reconfigurability. The proposed antenna has a dimension of 22×26×1.6 mm3. The frequency bandwidth obtained after simulation is 2GHz-10GHz. The prototype antenna is fabricated on the FR4 high-frequency substrate over 70 × 70 mm2 board. This antenna was measured by Vector Network analyzer for the maximum frequency of 10GHz, compared with the simulation results and reasonable agreement was obtained. Split ring technique is introduced on the patch, to filter unwanted frequencies. Simulation Gain plot confirms that particular range of frequency is suppressed.
Keywords :
UHF antennas; microstrip antennas; network analysers; planar antennas; radiocommunication; shaped beam antennas; FR4 high-frequency substrate; frequency 2 GHz to 10 GHz; optimized octagonal shaped planar antenna design; patch antenna; prototype antenna fabrication; split ring design technique; unwanted frequency filtering; vector network analyzer; wireless communication application performance analysis; Feeds; Radio frequency; Wireless communication; Octagonal; Planar Antenna; Reconfigurable; Split Ring; Wide band;
Conference_Titel :
Signal Processing, Communication and Networking (ICSCN), 2015 3rd International Conference on
Conference_Location :
Chennai
Print_ISBN :
978-1-4673-6822-3
DOI :
10.1109/ICSCN.2015.7219909
