DocumentCode :
1858423
Title :
Design of CMOS UWB low noise amplifier with cascode feedback
Author :
Doh, Heechan ; Jeong, Youngkyun ; Jung, Sungyong ; Joo, Youngjoong
Author_Institution :
Dept. of Electr. Eng., Univ. of Texas, Arlington, TX, USA
Volume :
2
fYear :
2004
fDate :
25-28 July 2004
Abstract :
This paper shows the design of a broadband single-stage single-ended low noise amplifier (LNA) for the frequency range 3GHz to 7GHz using 0.18μm RF CMOS technology. The cascode feedback topology and broadband matching technique were used in the amplifier to achieve broad bandwidth performance and input/output matching characteristics respectively. The effects of feedback resistor on noise figure (NF) and gain were also described. In the operating frequency range, 1.9dB of NF, 15dB of the gain, and 0.8dB of maximum gain flatness were achieved, and the maximum input/output return loss is lower than -1OdB. The total power consumption of the LNA including bias network is 21mW under a 1.8V single supply voltage.
Keywords :
CMOS integrated circuits; radiofrequency integrated circuits; wideband amplifiers; 0.18 micron; 1.8 V; 1.9 dB; 15 dB; 21 mW; 3 to 7 GHz; CMOS UWB low-noise amplifier; RF CMOS technology; bias network; broad bandwidth performance; broadband single-stage single-ended low noise amplifier; cascode feedback; feedback resistor; input/output matching; noise figure; power consumption; single supply voltage; Bandwidth; Broadband amplifiers; CMOS technology; Impedance matching; Low-noise amplifiers; Noise measurement; Output feedback; Radio frequency; Radiofrequency amplifiers; Topology;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Circuits and Systems, 2004. MWSCAS '04. The 2004 47th Midwest Symposium on
Print_ISBN :
0-7803-8346-X
Type :
conf
DOI :
10.1109/MWSCAS.2004.1354240
Filename :
1354240
Link To Document :
بازگشت