On Extended Kalman Filters with augmented state vectors for the stator flux estimation in SPMSMs

The demand for highly dynamic electrical drives, characterized by high quality torque control, in a wide variety of applications has grown tremendously during the past decades. Direct torque control (DTC) for permanent magnet synchronous motors (PMSM) can provide this accurate and fast torque control. When applying DTC the change of the stator flux linkage vector is controlled, based on torque and flux errors. As such the estimation of the stator flux linkage is essential. In the literature several possible solutions for the estimation of the stator flux linkage are proposed. In order to overcome problems associated with the integration of the back-emf, the use of state observers has been advocated in the literature. Several types of state observers have been conceived and implemented for PMSMs, especially the Extended Kalman Filter (EKF) has received much attention. In most reported applications however the EKF is only used to estimate the speed and rotor position of the PMSM in order to realize field oriented current control in a rotor reference frame. Far fewer publications mention the use of an EKF to estimate the stator flux linkage vector in order to apply DTC. Still the performance of the EKF in the estimation of the stator flux linkage vector has not yet been thoroughly investigated. In this paper the performance of the EKF for stator flux linkage is studied and simulated. The possibilities to improve the estimation by augmenting the state vector and the consequences of these alterations are explored. Important practical aspects for FPGA implementation are discussed.