• DocumentCode
    2005661
  • Title

    Development of transducer system for tissue harmonic imaging of long coded signal

  • Author

    Tanabe, Masayuki ; Okubo, Kan ; Tagawa, Norio

  • Author_Institution
    JSPS Res. Fellow, Tokyo Metropolitan Univ., Hachioji, Japan
  • fYear
    2009
  • fDate
    20-23 Sept. 2009
  • Firstpage
    2700
  • Lastpage
    2703
  • Abstract
    Higher spatial resolution and higher signal-to-noise ratio (SNR) are important issues for the quality of the medical ultrasound image. The objective of this study is to develop a transducer system which can obtain the echo signals with high spatial resolution and high SNR using a pulse compression technique and tissue harmonic imaging. In previous study, we proposed inline transmitter/receiver system which has the potential to solve the problem. The system mainly consists of a PZN-PT, two PVDF films and polyethylene. If the PZN-PT transmits long coded signals in the system, both PVDF films directly receive the transmitted signals, while just one of them receives the echo signals from targets. Although the signal obtained by the PVDF film placed on the transmission side of the PZN-PT contains the second harmonic components generated by tissue propagation, the echo signals and the transmitted signal directly received from the PZN-PT are mixed. To separate those signals, by connecting electric wires of two PVDF films, two signals obtained by two PVDF films are subtracted and the only differential signal; i.e. the echo signals from the targets, are obtained. Although the inline transmitter/receiver system has been able to certify the usefulness, the system also has a problem that one of two transmitted signals is undesirable and should be decreased. For the solution of the problem, two types are proposed in this study; Type-1 reflects and absorbs undesirable transmitted signals, and Type-2 reflects desirable transmitted signals and echo signals from targets. The both systems mainly consist of a PZN-PT, two PVDF films, polyethylene and a reflector. In this study, we investigate the influence of the reflector with various distance between the transducer and the reflector using PZFlex which is a standard finite element method (FEM) simulator for ultrasound propagation. As a result, it is shown that there is an optimal distance, and we can extract the harmonic components fr- - om the echo signals if the PZN-PT receives the echo signals before finishing transmitting. Subsequently, the echo signals obtained by two proposed systems are described and finally the feasibility of the proposed system is shown.
  • Keywords
    acoustic signal processing; biological tissues; biomedical ultrasonics; echo; finite element analysis; harmonic generation; pulse compression; ultrasonic imaging; ultrasonic propagation; ultrasonic transducers; ultrasonic transmission; PVDF film; PZN-PT; echo signals; finite element method; inline transmitter-receiver system; long coded signal; medical ultrasound image quality; polyethylene; pulse compression; second harmonic components; signal transmission; signal-to-noise ratio; spatial resolution; tissue harmonic imaging; tissue propagation; transducer system development; ultrasound propagation; Biomedical imaging; Biomedical transducers; High-resolution imaging; Plastic films; Polyethylene; Signal to noise ratio; Spatial resolution; Transmitters; Ultrasonic imaging; Ultrasonic transducers; IVUS; PVDF; PZN-PT; chirp; pulse compression; tissue harmonic imaging;
  • fLanguage
    English
  • Publisher
    ieee
  • Conference_Titel
    Ultrasonics Symposium (IUS), 2009 IEEE International
  • Conference_Location
    Rome
  • ISSN
    1948-5719
  • Print_ISBN
    978-1-4244-4389-5
  • Electronic_ISBN
    1948-5719
  • Type

    conf

  • DOI
    10.1109/ULTSYM.2009.5442052
  • Filename
    5442052