DocumentCode :
2035810
Title :
A selectable bandwidth LNA based on current conveyors
Author :
Garcia-Vazquez, H. ; Khemchandani, S.L. ; Dualibe, C. ; del Pino, J.
Author_Institution :
Service d´électronique et de Microélectronique (SEMi), Université de Mons (UMONS), Boulevard Dolez 31, 7000 Mons, Belgium
fYear :
2015
fDate :
30-31 July 2015
Firstpage :
33
Lastpage :
36
Abstract :
A selectable bandwidth CMOS Low Noise Amplifier (LNA) implemented in UMC 90nm process is presented. The LNA employs two current conveyors as building blocks to implement a wideband UHF (470 MHz to 862 MHz) voltage amplifier. By means of a switch and an LC tank added at the output, the LNA can operate also in the GSM narrowband (1.8 GHz). Using this simple technique it is possible to use only one LNA for both standards. Simulation results validate the proposed circuit. The simulated power gain (S21) is 13 dB for UHF band, and 6 dB for GSM. The input return loss (S11) is better than −10 dB in both modes. The amplifier has a simulated noise figure (NF) of 5.8 dB for UHF band and 6.3 dB when it is working in GSM band. This amplifier draws 3.9 mA from a ±1.2V supply.
Keywords :
CMOS integrated circuits; GSM; Gain; Impedance matching; Low-noise amplifiers; Switches; Wideband; Bandwidth; LC tank; LNA; current conveyor; switch;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Micro-Nanoelectronics, Technology and Applications (EAMTA), 2015 Argentine School of
Conference_Location :
Villa Maria, Argentina
Print_ISBN :
978-1-4799-8017-8
Type :
conf
DOI :
10.1109/EAMTA.2015.7237375
Filename :
7237375
Link To Document :
بازگشت