Title :
Dielectric properties of filled carbon nanotubes/epoxy composites with high dielectric constant
Author :
Guo, Xiusheng ; Yu, Demei ; Gao, Yan ; Li, Qin ; Wan, Weitao ; Gao, Zhan
Author_Institution :
State Key Lab of the Electr. Insulation & Power Equip., Xi´´an Jiaotong Univ.
Abstract :
In this paper, the multiwall carbon nanotubes were opened and then filled with Cu and Ag materials. Several kinds of carbon nanotubes/epoxy composites were prepared by melt mixing epoxy resin and the nanotubers mentioned above. The dielectric properties of the composites were investigated at room temperature. Experimental results showed that the dielectric properties of the MWNTs/epoxy composites depended evidently on the characteristics of the nanotubes and their content in the composites. A dielectric constant of 305 of the composite with 1.1 Wt% Ag-filled nanotubes was observed in the low frequency range, which is 80 times higher than that of the epoxy matrix. The filler loading level in the composites required to reach high dielectric constant is much lower than that of ceramic composites, which enable the MWNTs composites to posses good mechanical properties
Keywords :
carbon nanotubes; ceramics; composite materials; copper; permittivity; polymers; silver; Ag-filled nanotube; C-Ag; C-Cu; Cu-filled nanotube; MWNT composite; ceramic composite; dielectric constant; filled carbon nanotubes-epoxy composite; filler loading level; mechanical properties; melt mixing epoxy resin; multiwall carbon nanotubes; nanotubers; Carbon nanotubes; Ceramics; Dielectric constant; Dielectric materials; Epoxy resins; Frequency; High-K gate dielectrics; Mechanical factors; Organic materials; Temperature; Carbon nanotube; Composites; Dielectric property; Epoxy;
Conference_Titel :
Nano/Micro Engineered and Molecular Systems, 2006. NEMS '06. 1st IEEE International Conference on
Conference_Location :
Zhuhai
Print_ISBN :
1-4244-0139-9
Electronic_ISBN :
1-4244-0140-2
DOI :
10.1109/NEMS.2006.334726
