Title :
A W-Band x12 Frequency Multiplier MMIC in Waveguide Package Using Quartz and Ceramic Transitions
Author :
Weber, R. ; Tessmann, A. ; Zink, M. ; Kuri, M. ; Stulz, H.-P. ; Riessle, M. ; Massler, H. ; Maier, T. ; Leuther, A. ; Schlechtweg, M. ; Kallfass, I.
Author_Institution :
Fraunhofer-Inst. for Appl. Solid State Phys. (IAF), Freiburg, Germany
Abstract :
This paper describes a single-chip W-band frequency multiplier MMIC in a waveguide package. The multiplication factor by 12 has been obtained with a doubler, tripler and doubler chain. The MMIC has been realized in a 100 nm metamorphic HEMT technology. It has been packaged in a split-block module using a high precision 50 μm thick quartz transition for the W-band output and a low cost ceramic transition on the input. A power supply board, embedded in the module, provides six different voltages to the MMIC. The packaged frequency multiplier achieves an output power of -0.8 dBm, a conversion gain of 0.2 dB and a 3-dB bandwidth of 16 GHz from 86 to 102 GHz with a suppression of the unwanted harmonics of more than 25.5 dBc. The phase-noise of the output signal is not affected by the multiplier circuit.
Keywords :
HEMT integrated circuits; ceramic packaging; field effect MIMIC; frequency multipliers; harmonics suppression; quartz; waveguide transitions; SiO2; bandwidth 16 GHz; ceramic transitions; frequency 86 GHz to 102 GHz; frequency multiplier MMIC; gain 0.2 dB; harmonic suppression; metamorphic HEMT technology; power supply board; single chip W-band frequency multiplier; size 100 nm; split block module; waveguide package; Frequency measurement; Harmonic analysis; MMICs; Microstrip; Phase measurement; Substrates; mHEMTs;
Conference_Titel :
Compound Semiconductor Integrated Circuit Symposium (CSICS), 2011 IEEE
Conference_Location :
Waikoloa, HI
Print_ISBN :
978-1-61284-711-5
Electronic_ISBN :
1550-8781
DOI :
10.1109/CSICS.2011.6062475