DocumentCode :
2087940
Title :
Wireless photoplethysmographic device for heart rate variability signal acquisition and analysis
Author :
Reyes, I. ; Nazeran, H. ; Franco, Marc ; Haltiwanger, E.
Author_Institution :
Electr. & Comput. Eng., Univ. of Texas at El Paso, El Paso, TX, USA
fYear :
2012
fDate :
Aug. 28 2012-Sept. 1 2012
Firstpage :
2092
Lastpage :
2095
Abstract :
The photoplethysmographic (PPG) signal has the potential to aid in the acquisition and analysis of heart rate variability (HRV) signal: a non-invasive quantitative marker of the autonomic nervous system that could be used to assess cardiac health and other physiologic conditions. A low-power wireless PPG device was custom-developed to monitor, acquire and analyze the arterial pulse in the finger. The system consisted of an optical sensor to detect arterial pulse as variations in reflected light intensity, signal conditioning circuitry to process the reflected light signal, a microcontroller to control PPG signal acquisition, digitization and wireless transmission, a receiver to collect the transmitted digital data and convert them back to their analog representations. A personal computer was used to further process the captured PPG signals and display them. A MATLAB program was then developed to capture the PPG data, detect the RR peaks, perform spectral analysis of the PPG data, and extract the HRV signal. A user-friendly graphical user interface (GUI) was developed in LabView to display the PPG data and their spectra. The performance of each module (sensing unit, signal conditioning, wireless transmission/reception units, and graphical user interface) was assessed individually and the device was then tested as a whole. Consequently, PPG data were obtained from five healthy individuals to test the utility of the wireless system. The device was able to reliably acquire the PPG signals from the volunteers. To validate the accuracy of the MATLAB codes, RR peak information from each subject was fed into Kubios software as a text file. Kubios was able to generate a report sheet with the time domain and frequency domain parameters of the acquired data. These features were then compared against those calculated by MATLAB. The preliminary results demonstrate that the prototype wireless device could be used to perform HRV signal acquisition and analysis.
Keywords :
graphical user interfaces; medical signal processing; microcontrollers; photoplethysmography; virtual instrumentation; HRV signal; Kubios software; LabView; MATLAB program; PPG signal analysis; RR peak information; autonomic nervous system; cardiac health; digitization; graphical user interface; heart rate variability signal acquisition; low power wireless PPG device; microcontroller; noninvasive quantitative marker; wireless photoplethysmographic device; wireless transmission; Biomedical monitoring; Graphical user interfaces; Heart rate variability; Medical services; Wireless communication; Wireless sensor networks; Algorithms; Diagnosis, Computer-Assisted; Electrocardiography; Equipment Design; Equipment Failure Analysis; Heart Rate; Humans; Monitoring, Ambulatory; Photoplethysmography; Reproducibility of Results; Sensitivity and Specificity; Signal Processing, Computer-Assisted; Telemetry;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Engineering in Medicine and Biology Society (EMBC), 2012 Annual International Conference of the IEEE
Conference_Location :
San Diego, CA
ISSN :
1557-170X
Print_ISBN :
978-1-4244-4119-8
Electronic_ISBN :
1557-170X
Type :
conf
DOI :
10.1109/EMBC.2012.6346372
Filename :
6346372
Link To Document :
بازگشت