Title :
Effect of Catalyst Composition on catalytic hydrolysis of COS
Author :
Yi, Hong-Hong ; Wang, Hong-Yan ; Tang, Xiao-Long ; Yu, Li-Li ; Yang, Li-na
Author_Institution :
Kunming Univ. of Sci. & Technol., Kunming, China
Abstract :
A series of catalysts with various Co/Ni and M2+/M3+ mole ratios were prepared by decomposition of Co/Ni/Al hydrotalcite-like compounds(HTLcs) precursors at 350°C and used for hydrolysis of carbonyl sulfide(COS). The effect on the catalytic performance was investigated at 50°C and GHSV of 1000~3000 h-1 with relative humidity of 2.40%. The catalyst with Co/Ni at 0.25~0.5 and M2+/M3+ at 2~3 had the best activity. The Co/Ni content barely affected the phase composition of the catalysts. The results may indicate that the Ni ion is the catalytic center, while the Co ion is the catalyst accelerator. From the SEM-EDAS analysis, the structures of catalysts with different M2+/M3+ changed a lot and the various metal ions in samples were consistent with the raw material.
Keywords :
X-ray chemical analysis; aluminium; carbon compounds; catalysis; catalysts; cobalt; dissociation; humidity; nickel; scanning electron microscopy; COS; Co-Ni-Al; SEM-EDAS analysis; carbonyl sulfide hydrolysis; catalyst composition; catalytic hydrolysis; decomposition; hydrotalcite-like compounds precursors; hydrotalcite-like precursors; phase composition; relative humidity; temperature 350 degC; temperature 50 degC; Acceleration; Aerosols; Corrosion; Photochemistry; Purification; Raw materials; Scanning electron microscopy; Tail; Terrestrial atmosphere; X-ray diffraction;
Conference_Titel :
Power and Energy Engineering Conference (APPEEC), 2010 Asia-Pacific
Conference_Location :
Chengdu
Print_ISBN :
978-1-4244-4812-8
Electronic_ISBN :
978-1-4244-4813-5
DOI :
10.1109/APPEEC.2010.5449010