Title :
Design of the SSC linac
Author :
Watson, J. ; Bhandari, R. ; Chang, C. ; Cutler, R. ; Funk, L. ; Leifete, G. ; Raparia, D. ; Bhatia, T. ; Garnett, R. ; Nath, S. ; Neuschaefer, G. ; Young, L.
Author_Institution :
Superconducting Super Collider Lab., Dallas, TX, USA
Abstract :
The preliminary design of the 600-MeV H/sup -/ linac for the Superconducting Super Collider (SSC) injector is described. The linac must provide a 25-mA beam during 7-35 mu s macropulses at 10 Hz within injection bursts. Normalized transverse emittances of less than 0.4 pi mm-mrad (RMS) are required for injection into the low Energy Booster (LEB) synchrotron. Cost, ease of commissioning, and operational reliability are important considerations. The linac will consist of an H/sup -/ source with electrostatic low-energy beam transport (LEBT), a 2.5-MeV radiofrequency quadrupole (RFQ) accelerator, a 70-MeV drift-tube linac (DTL), and 530 MeV of coupled-cavity linac (CCL). The RFQ and DTL operate at 428 MHz and the CCL operates at 1284 MHz. A modest total length of 143 m results from the tradeoff between cost optimization and reliability.<>
Keywords :
beam handling equipment; ion accelerators; ion sources; linear accelerators; 10 Hz; 1284 MHz; 143 m; 2.5 MeV; 428 MHz; 530 MeV; 600 MeV; 7 to 35 mus; 70 MeV; H/sup -/ source; RFQ accelerator; SSC linac; coupled-cavity linac; drift-tube linac; electrostatic low-energy beam transport; injector; operational reliability; preliminary design; radiofrequency quadrupole; transverse emittances; Acceleration; Colliding beam devices; Frequency; Laboratories; Linear particle accelerator; Optical coupling; Particle beams; Safety; Structural beams; Testing;
Conference_Titel :
Particle Accelerator Conference, 1991. Accelerator Science and Technology., Conference Record of the 1991 IEEE
Conference_Location :
San Francisco, CA, USA
Print_ISBN :
0-7803-0135-8
DOI :
10.1109/PAC.1991.164368
