3D interconnection by FIB assisted Pt deposition and electroless nickel deposition on the sides and edges of an I-Seed

This paper reports on the development of a 3D interconnection process leading to the successful assembly of a five-layer 3-D 1 mm cube module. This proof of concept module demonstrates the capability for successful integration and interconnection of commercial off the shelf components to fabricate functional modules in 1 mm cube dimensions. It also demonstrates that use of established volume scale technologies like flip-chip dicing and patterning techniques are viable for fabricating these 1 mm modules. The demonstrator consists of LED´s bonded to the six sides of the 1 mm cube, interconnected and powered up. The work particularly report on two different processes to fabricate the interconnection pattern using direct focused ion beam (FIB) assisted Pt deposition and electroless metal deposition, which again patterned by FIB. Uniform thickness of the deposit and excellent coverage on all six sides is achieved by electroless nickel deposition. Voltage current characterisation of the deposited Pt shows a resistivity value of 1864 plusmn 100 muOmega cm, whereas electroless Ni film shows a resistivity of 25 muOmega cm due to boron inclusion. 100 nm Au layer is deposited by chemical displacement reaction to enhance the conductivity and solderability of the film