DocumentCode
2186085
Title
Operational experience with SLC damping ring kicker magnets
Author
Mattison, T. ; Cassel, R. ; Donaldson, A. ; Gross, G. ; Harvey, A.
Author_Institution
SLAC, Stanford, CA, USA
fYear
1991
fDate
6-9 May 1991
Firstpage
2331
Abstract
The damping ring kickers for the SLAC Linear Collider (SLC) must provide 7-Mrad kicks to 1.2-GeV beams with 60-nsec rise and fall times and fit in a 50-cm length around a 21-mm-diameter ceramic beam pipe. This requires that they operate at up to 40 kV. The construction and operation of two types of quasi-coaxial ferrite magnet potted with RTV silicone rubber are discussed. Production yield has been improved by changes in RTV designing, transfer, and cure. Operation lifetime is dominated by voltage, radiation, and thermal cycling.<>
Keywords
beam handling equipment; linear accelerators; magnets; RTV designing; RTV silicone rubber; SLAC Linear Collider; SLC damping ring kicker magnets; ceramic beam pipe; cure; quasi-coaxial ferrite magnet; thermal cycling; Ceramics; Coatings; Conductors; Damping; Ferrites; Magnets; Particle beams; Slabs; Structural beams; Tiles;
fLanguage
English
Publisher
ieee
Conference_Titel
Particle Accelerator Conference, 1991. Accelerator Science and Technology., Conference Record of the 1991 IEEE
Conference_Location
San Francisco, CA, USA
Print_ISBN
0-7803-0135-8
Type
conf
DOI
10.1109/PAC.1991.164956
Filename
164956
Link To Document