A wireless electrocardiogram detection for personal health monitoring

The current paper presents low-power analog integrated circuits (ICs) for wireless electrocardiogram (ECG) detection in personal health monitoring. Considering the power-efficient communication in the body sensor network (BSN), the required low-power analog ICs are developed for a healthcare system through miniaturization and system integration. The proposed system comprises the design and implementation with three subsystems, namely, (1) the ECG acquisition node, (2) the protocol for standard IEEE 802.15.4 ZigBee system, and (3) the radio frequency (RF) transmitter circuits. A preamplifier, a low-pass filter, and a successive-approximation analog-to-digital converter (SA-ADC) are integrated to detect an ECG signal. For high integration, the ZigBee protocol is adopted for wireless communication. To transmit the ECG signal through wireless communication, a quadrature voltage-controlled oscillator and a 2.4 GHz low-IF transmitter with a power amplifier and up-conversion mixer are also developed. In the receiver, a 2.4 GHz fully integrated CMOS radio-frequency front-end with a low-noise amplifier, and a quadrature mixer is proposed. The low-power wireless bio-signal acquisition SoC (WBSA-SoC) has been implemented in TSMC 0.18-μm standard CMOS process. The measurement results on the human body reveal that the ECG signals can be acquired effectively by the proposed SoC.