The study of vibrational performance on different doped low creep lead free solder paste and solder ball grid array packages

Relatively little is known about the performance of the doped Ball Grid Array (BGA) packages used in semiconductor industries, even though newer products are widely being introduced to the market. This work experimentally investigates the doping effects of the BGA packages with SAC 305 alloys, caused by the vibration loading. This experiment focuses on the vibration fatigue life of 15 mm CABGA packages with 208 perimeter solder balls on a 0.8 mm pitch. The test boards were built to withstand JEDEC JESD22-B103B standards of high stress test in vibrational shaker table to assess the solder joint performance. The test boards are built with three different reflow profiles and two different stencil thicknesses 8 mil (6 mil with overprint) and 4 mil to study the differences in doping effect of the new doped alloys. The WLCSP assembly was subjected to accelerated life test of severe random vibration per board. The reliability of the component is determined by the ability of the components to withstand vibration as a result of motion produced by field operations. The deleterious effect of the mechanical loading of BGA´s on the characteristic fatigue lifetime is reported. The results show that the material characteristics has a direct impact on the total time to failure. The results show that the Time-To-Failure (TTF) of the solder joint decreases with doping. The effectiveness of this characteristics was demonstrated with promising results through vibration testing of different lead free low creep alloys. This paper concludes with discussion of the deterioration intensity aging has on SAC alloys and the change in reliability due to doping.