• DocumentCode
    2337740
  • Title

    Experimental Study on Solar Drying of Lignite

  • Author

    Luo, Lulin ; Liu, Jianzhong ; Cheng, Jing ; Xi, Jianfei ; Zhou, Junhu ; Cen, Kefa

  • Author_Institution
    Zhejiang Univ., Hangzhou, China
  • Volume
    1
  • fYear
    2010
  • fDate
    18-20 Dec. 2010
  • Firstpage
    714
  • Lastpage
    718
  • Abstract
    In this study, a thin-layer solar drying experiment was conducted outdoors to investigate characteristics of solar drying of lignite. The maximum temperature of lignite in the solar dryer reached 87 □ in 140 minutes when the hourly average of solar radiation intensity was about 950 W/m2. Meanwhile the moisture content of lignite was reduced to 1.38 % from 23.08%. To examine the feasibility of using a solar drier for drying lignite, another drying experiment has been conducted under two different modes (a) solar drying of lignite (b) open sun drying of lignite. The useful temperature rise of about 25 □ was achieved in the solar dryer, which increased the drying potential of lignite by 6.21%. Moreover, influencing factors in solar drying of lignite, including the effect of solar radiation intensity, the particle size of lignite and the thickness of lignite layer, were investigated. The results indicated that strong solar radiation, small lignite particles and thin lignite layer are good for the increase of the performance of solar drying of lignite.
  • Keywords
    drying; solar radiation; lignite solar drying; open sun drying; solar drier; solar radiation; thin-layer solar drying; time 140 min; lignite; moisture content; open sun drying; solar drying;
  • fLanguage
    English
  • Publisher
    ieee
  • Conference_Titel
    Digital Manufacturing and Automation (ICDMA), 2010 International Conference on
  • Conference_Location
    ChangSha
  • Print_ISBN
    978-0-7695-4286-7
  • Type

    conf

  • DOI
    10.1109/ICDMA.2010.286
  • Filename
    5701260