Fabrication and test of prototype ring magnets for the ALS

Author

Tanabe, J. ; Andresen, N. ; Avery, R. ; Caylor, R. ; Green, M.I. ; Hoyer, E. ; Halback, K. ; Hernandez, S. ; Humphries, D. ; Kajiyama, Y. ; Keller, R. ; Low, W. ; Marks, S. ; Milburn, J. ; Yee, D.

Author_Institution

Lawrence Berkeley Lab., California Univ., CA, USA

fYear

1989

fDate

20-23 Mar 1989

Firstpage

566

Abstract

Prototype models for the Advanced Light Source (ALS) booster dipole, quadrupole, and sextupole and the storage ring gradient magnet, quadrupole, and sextupole have been constructed. The booster magnet prototypes have been tested. The storage ring magnets are undergoing tests and magnetic measurements. The authors review the designs and parameters for these magnet designs which respond to the special constraints imposed by the requirements for both accelerator rings, and they review some of the results of magnet measurements for the prototype

Keywords

beam handling equipment; electromagnets; light sources; magnetic variables measurement; storage rings; ALS; Advanced Light Source; accelerator rings; booster dipole; fabrication; magnetic measurements; prototype ring magnets; quadrupole; sextupole; storage ring gradient magnet; Coils; Fabrication; Lamination; Magnetic cores; Magnetic materials; Magnetic variables measurement; Magnets; Prototypes; Storage rings; Testing;

fLanguage

English

Publisher

ieee

Conference_Titel

Particle Accelerator Conference, 1989. Accelerator Science and Technology., Proceedings of the 1989 IEEE

Conference_Location

Chicago, IL

Type

conf

DOI

10.1109/PAC.1989.73183

Filename

73183