Design and Development of Electron Gun and PPM focusing for Vacuum Power Booster TWT of Broadband MPM

Author

Sharma, R.K. ; Sharma, S.M. ; Choudhury, A.R. ; Gupta, R.K. ; Ghosh, T.K.

Author_Institution

Central Electron. Eng. Res. Inst.

fYear

0

fDate

0-0 0

Firstpage

155

Lastpage

156

Abstract

The electron gun and PPM focusing system have been designed and developed for above VPB-TWT. M-type dispenser cathode and electrically isolated BFE has been used. The gun adapter and the anode have been made of Cu-Ni and molybdenum respectively to get desired magnetic flux at the cathode. Compact electron gun assembly has been designed. High voltage analysis, theoretical as well as experimental, is carried out before finalization of assembly in order to meet the desired hold off voltages between different electrodes. Temperature and emission characteristics of the cathode are measured under the loaded conditions

Keywords

cathodes; copper alloys; electron guns; molybdenum; nickel alloys; travelling wave tubes; vacuum microelectronics; Cu-Ni; M-type dispenser cathode; Mo; PPM focusing; broadband MPM; electrically isolated BFE; electron gun; emission characteristics; gun adapter; magnetic flux; temperature characteristics; travelling wave tube; vacuum power booster; Assembly; Cathodes; Circuit simulation; Design optimization; Electron beams; Magnetic circuits; Magnetic field measurement; Magnetic flux; Magnets; Voltage;

fLanguage

English

Publisher

ieee

Conference_Titel

Vacuum Electronics Conference, 2006 held Jointly with 2006 IEEE International Vacuum Electron Sources., IEEE International

Conference_Location

Monterey, CA

Print_ISBN

1-4244-0108-9

Type

conf

DOI

10.1109/IVELEC.2006.1666231

Filename

1666231