DocumentCode
2424327
Title
Dielectric properties of niobium oxide film and tantalum oxide film at electrolytic niobium and tantalum capacitors
Author
Abuetwirat, Inas ; Palai-Dany, Tomas
Author_Institution
Dept. of Phys., Brno Univ. of Technol., Brno, Czech Republic
fYear
2012
fDate
21-22 May 2012
Firstpage
484
Lastpage
487
Abstract
Complex permittivity of the niobium oxide capacitor 4.7 μF/ 10 Vdc and tantalum oxide 1 μF/ 25 Vdc was measured at room temperature at frequencies from 20 Hz to 2 MHz using the HP (Agilent) E4980A impedance analyzer, with Agilent 16034E 2-terminal test fixture for surface mounted devices (SMD). The real part of the complex permittivity for the niobium oxide capacitor at room temperature is 50 at 20Hz with one dielectric relaxation peak, which was observed at about 10 kHz. Whereas the real part of the complex permittivity for tantalum oxide capacitor at room temperature is 27 at 20Hz with one dielectric relaxation peak, which was observed at about 100 kHz. It has been shown that to be useful to use niobium and tantalum oxide capacitor below 100 kHz for measuring the dielectric properties of niobium and tantalum oxide film.
Keywords
electrolytic capacitors; niobium compounds; permittivity; surface mount technology; tantalum compounds; Agilent 16034E 2-terminal test fixture; E4980A impedance analyzer; NbO; Ta2O3; capacitance 1 muF; capacitance 4.7 muF; complex permittivity; dielectric properties; electrolytic capacitor; surface mounted device; voltage 10 V; voltage 25 V; Capacitors; Conductivity; Dielectric measurements; Fixtures; Niobium; Permittivity; Real part of complex permittivity; conductivity; imaginary part of complex permittivity; loss factor;
fLanguage
English
Publisher
ieee
Conference_Titel
ELEKTRO, 2012
Conference_Location
Rajeck Teplice
Print_ISBN
978-1-4673-1180-9
Type
conf
DOI
10.1109/ELEKTRO.2012.6225671
Filename
6225671
Link To Document