Redundant robot control for higher flexibility

The joint velocities required to move the robot end-effector with a desired speed depend on the direction of motion. Robot´s mobility, i.e., its ability to move, is better in the directions requiring lower joint velocities. When the robot is near a singularity configuration, the joint velocities required to attain the end-effector velocity in certain directions are extremely high. Thus arbitrary directional changes become more difficult. Robot´s flexibility, defined as its ability to change the direction of the end-effector motion, is low in the vicinity of singular configurations. Addition of redundant joints can greatly enhance their flexibility. However, this requires a proper utilization of redundancy. A control scheme is presented to improve the flexibility of redundant robots. The feasibility and effectiveness of this control scheme are demonstrated through simulation.