Title :
Fiber optic line phase noise and drift effects on bistatic imaging radar performance
Author :
Lane, T.L. ; Scheer, J.A.
Author_Institution :
Georgia Tech. Res. Inst., Georgia Inst. of Technol., Atlanta, GA, USA
Abstract :
Instrumentation grade, coherent, bistatic radar cross section (RCS) measurement systems require a reliable low-noise method to link the reference, local oscillator (LO) and intermediate frequency (IF) coherent signals between the transmit and receive subsystems. One approach to this is the use of a fiber optic link (FOL). Phase noise tests were performed on a distributed feedback (DFB) type laser transmitter-photodiode receiver link with a delay distance of 2.26 kilometers. The measurements were conducted using a standard Hewlett Packard HP 3048 A phase noise test set, and a variety of link configurations at a variety of frequencies from 100 MHz to 5 GHz. Further, system tests have been performed to incorporate a FOL into a coherent bistatic instrumentation radar system local oscillator path, and perform image processing on an emulated target. A Lintek elan system was configured to emulate bistatic operation by separating the transmit and receive local oscillator lines, allowing one of them to be excited through a fiber optic link. A target with one or two scatterers was emulated using a delay line between a sample of the transmit signal and a receiver injection port. This paper describes the theoretical effects of phase noise (close-in and higher frequency) on target scatterer imaging performance, describes the FOL tests and the architecture of the bistatic radar tests performed, and presents the results of the tests, including baseline system performance and performance using the FOL. Images representing closely spaced scatterers are presented, and the point spread function of a long dwell (40 seconds) data file, representing an ISAR process is presented. One of the limiting factors in the use of a FOL for long dwell times is that of the variable delay, caused by variation of the propagation velocity with laser frequency drift (dispersion), and the change in index of refraction with temperature. A method for mitigating the effects of this drift is presented
Keywords :
automatic testing; electric noise measurement; optical fibres; performance evaluation; phase noise; radar cross-sections; radar imaging; telecommunication equipment testing; 100 MHz to 5 GHz; 2.26 km; Hewlett Packard HP 3048 A; ISAR process; bistatic imaging radar performance; bistatic radar cross section; closely spaced scatterers; coherent bistatic instrumentation radar; delay distance; distributed feedback (DFB) type laser; drift effects; fiber optic line phase noise; image processing; intermediate frequency coherent signals; laser frequency drift; measurement systems; phase noise tests; point spread function; propagation velocity; receive subsystems; reference local oscillator; transmit subsystems; transmitter-photodiode receiver link; Frequency; Instruments; Local oscillators; Optical fibers; Optical imaging; Optical scattering; Performance evaluation; Phase noise; Radar scattering; System testing;
Conference_Titel :
Aerospace and Electronics Conference, 1996. NAECON 1996., Proceedings of the IEEE 1996 National
Conference_Location :
Dayton, OH
Print_ISBN :
0-7803-3306-3
DOI :
10.1109/NAECON.1996.517719