Design of reconfigurable satellite reflector antenna for variable beam contouring

Author

Pontoppidan, K. ; Nielsen, P.H. ; Boisset, J.P.

Author_Institution

TICRA, Copenhagen, Denmark

fYear

1991

fDate

24-28 June 1991

Firstpage

678

Abstract

The authors describe the electrical design of a reflector antenna where the reflector dish is reconformable such as to provide highly different contoured beams. A typical EUTELSAT coverage has been selected as the design driver for the present study. It is a requirement of the study that the surface material contain bending stiffness such that a smoother surface shape is obtained. A preliminary analysis indicates that a shaped reflector with an aperture diameter of 1.3 m will be sufficient to meet the required electrical performance. A parent paraboloid with the following dimensions has therefore been selected: aperture diameter 1.3 m, focal length 1.3 m, clearance between lower-edge and paraboloid axes 0.2 m.<>

Keywords

antenna radiation patterns; reflector antennas; satellite antennas; 1.3 m; EUTELSAT coverage; aperture diameter; bending stiffness; contoured beams; electrical design; electrical performance; focal length; paraboloid; reconfigurable satellite reflector antenna; reflector dish; shaped reflector; surface material; variable beam contouring; Apertures; Feeds; Manufacturing; Reflector antennas; Satellite antennas; Shape control; Solids; Subcontracting; Testing; Wire;

fLanguage

English

Publisher

ieee

Conference_Titel

Antennas and Propagation Society International Symposium, 1991. AP-S. Digest

Conference_Location

London, Ontario, Canada

Print_ISBN

0-7803-0144-7

Type

conf

DOI

10.1109/APS.1991.174930

Filename

174930