Title :
Ultra-low noise microwave phase stabilizer using sapphire ring resonator
Author :
Dick, G.J. ; Saunders, J. ; Tucker, T.
Author_Institution :
Jet Propulsion Lab., California Inst. of Technol., Pasadena, CA, USA
Abstract :
The preliminary design details for two sapphire whispering gallery mode phase stabilizers are presented. The sapphire resonators are cooled in individual liquid nitrogen dewars to an operating temperature of approximately 80 K. Each operates to stabilize the phase of an 8.1 GHz signal derived from a quartz crystal oscillator operating at 100 MHz. Ultra-low phase noise (-80 dB/Hz at 1 Hz offset) is projected due to the high resonator Q (3×107 at 80 K). The temperature of the thermally uncompensated sapphire resonators is stabilized by RF heating to a value approximately 3 degrees above that of a liquid nitrogen bath. Oscillator configurations which can further reduce oscillator phase noise are discussed and analyzed. These circuit improvements should provide crystal-oscillator type performance in a room-temperature 10 GHz (X-band) oscillator using a whispering gallery mode sapphire resonator with an intrinsic Q of 2×105. A general description of the oscillator systems and the thermal design considerations together with design details and analysis for the microwave aspects is presented
Keywords :
phase control; resonators; sapphire; solid-state microwave circuits; stability; 10 GHz; 8.1 GHz; 80 K; RF heating; X-band; cooling; liquid nitrogen dewars; microwave phase stabilizer; noise reduction; oscillator phase noise; quartz crystal oscillator; sapphire ring resonator; thermal design considerations; ultralow noise design; whispering gallery mode; Electromagnetic heating; Laboratories; Microwave oscillators; Nitrogen; Noise measurement; Optical ring resonators; Phase noise; Propulsion; Radio frequency; Temperature dependence;
Conference_Titel :
Frequency Control, 1990., Proceedings of the 44th Annual Symposium on
Conference_Location :
Baltimore, MD
DOI :
10.1109/FREQ.1990.177547