DocumentCode
29139
Title
2.5-7 ghz single balanced mixer with integrated ruthroff-type balun in 0.18 μm cmos technology
Author
Chiou, H.-K. ; Chung, H.-Y.
Author_Institution
Dept. of Electr. Eng., Nat. Central Univ., Jhongli, Taiwan
Volume
49
Issue
7
fYear
2013
fDate
March 28 2013
Firstpage
474
Lastpage
475
Abstract
An on-chip Ruthroff-type balun fabricated in tsmcTM 0.18 μm CMOS technology has been realised and used in a single balanced mixer. By using the phase compensation line and appropriately choosing the characteristic impedance of transmission lines, the balun was realised with a minimum insertion loss of 0.71 dB and the 1 dB bandwidth over a frequency range from 3.2 to 8.4 GHz. The compact size of 0.088 mm2 is achieved owing to the short length of the transmission line winding, approximately 1/18 λg, and the adoption of broadside-coupled and spiral-shape structures. A simple single balanced mixer with the Ruthroff-type balun was then designed to demonstrate the capability of the broadband and low-loss balun. A minimum conversion loss of 12.48 dB with a 3 dB bandwidth from 2.5 to 7 GHz was measured at the LO drive of only 6 dBm. The chip area, including pads, is 0.49 mm2.
Keywords
CMOS integrated circuits; baluns; mixers (circuits); CMOS technology; broadband balun; broadside-coupled structure; characteristic impedance; conversion loss; frequency 2.5 GHz to 7 GHz; frequency 3.2 GHz to 8.4 GHz; insertion loss; integrated Ruthroff-type balun; low-loss balun; on-chip Ruthroff-type balun; phase compensation line; single balanced mixer; size 0.18 micron; spiral-shape structure; transmission line winding;
fLanguage
English
Journal_Title
Electronics Letters
Publisher
iet
ISSN
0013-5194
Type
jour
DOI
10.1049/el.2012.4091
Filename
6504971
Link To Document