DocumentCode :
29480
Title :
Metal Bulk Foil Resistor Characterization for BAW Application at Low Cryogenic Temperatures
Author :
Bara-Maillet, Romain ; Goryachev, M. ; Creedon, D.L. ; Le Floch, J.-M. ; Tobar, M.E.
Author_Institution :
Univ. of Western Australia, Crawley, WA, Australia
Volume :
63
Issue :
3
fYear :
2014
fDate :
Mar-14
Firstpage :
628
Lastpage :
632
Abstract :
We report on the development of a characterization system and calibration procedure for a bulk acoustic wave (BAW) resonator using a bulk metal foil resistor operated at temperatures as low as tens of millikelvin. The 50-Ω resistor demonstrated extremely good stability and small drift at a temperature of 50 mK, with the resistance varying by 1.5% between room temperature and 50 mK. The BAW quartz resonator exhibited a quality factor of 8×105 at 206 MHz, which is one order of magnitude higher than state-of-the-art equivalent devices at ambient temperature. Such results were obtained due to the combination of a suitable technology of resistor, and the custom design of an electronic circuit board for calibration.
Keywords :
acoustic resonators; bulk acoustic wave devices; calibration; crystal resonators; thin film resistors; BAW quartz resonator; bulk acoustic wave resonator; calibration procedure; electronic circuit board; low cryogenic temperature; metal bulk foil resistor characterization; resistance 50 ohm; stability; temperature 50 mK; Australia; Electrical resistance measurement; Metals; Resistance; Resistors; Standards; Temperature measurement; BAW; calibration; cryogenic; resistance; stability;
fLanguage :
English
Journal_Title :
Instrumentation and Measurement, IEEE Transactions on
Publisher :
ieee
ISSN :
0018-9456
Type :
jour
DOI :
10.1109/TIM.2013.2281561
Filename :
6613515
Link To Document :
بازگشت