Development of monitoring system for series HEV bus with touch panel

Author

Chun, Tae-Won ; Tran, Quang-Vinh ; Choi, Uk-Don ; Kim, Heung-Gun

Author_Institution

Dept. of Electr. Eng., Ulsan Univ., Ulsan

fYear

2008

fDate

1-3 Sept. 2008

Firstpage

1421

Lastpage

1424

Abstract

In this paper, the monitoring strategies for a series hybrid electric vehicle (SHEV) bus are suggested for the optimal operation of powertrain and detection of abnormal conditions during the initial development of hybrid technologies. The monitoring system receives the messages from four control modules in the SHEV bus through a CAN, and then displays the data in the messages on a touch panel. In addition, all gauges and the on/off switching state of a set of telltale lamps are indicated. The monitoring system is implemented by both the 32-bit DSP and touch panel, and it is installed and tested on the real SHEV bus.

Keywords

condition monitoring; controller area networks; digital signal processing chips; hybrid electric vehicles; 32-bit DSP; CAN; condition monitoring; monitoring system; on/off switching state; series HEV bus; series hybrid electric vehicle bus; telltale lamps; touch panel; word length 32 bit; Battery powered vehicles; Communication system control; Condition monitoring; Control systems; Digital signal processing; Hybrid electric vehicles; Ice; Lamps; Mechanical power transmission; Vehicle detection; DSP; monitoring; network; series hybrid electric vehicle (SHEV) bus;

fLanguage

English

Publisher

ieee

Conference_Titel

Power Electronics and Motion Control Conference, 2008. EPE-PEMC 2008. 13th

Conference_Location

Poznan

Print_ISBN

978-1-4244-1741-4

Electronic_ISBN

978-1-4244-1742-1

Type

conf

DOI

10.1109/EPEPEMC.2008.4635467

Filename

4635467