Microstrip Patch Antenna with polypyrrole ground plane

Author

Verma, Akhilesh ; Bates, Bevan D.

Author_Institution

Sch. of Electr. & Electron. Eng., Univ. of Adelaide, Adelaide, SA

fYear

2008

fDate

2-5 Sept. 2008

Firstpage

424

Lastpage

429

Abstract

A microstrip patch antenna (MPA) has been fabricated using a conducting polymer, polypyrrole (PPy), as a ground plane. The bulk conductivity level of the PPy ground plane is 2000 S/m and its thickness is 330 mum. The antenna is designed to operate in the 11 GHz region. The measured and simulated results at the resonant frequency such as return loss, gain, radiation pattern and bandwidth are presented in comparison with a similar copper ground plane antenna. CST Microwave Studio was used as a design and simulation tool and experimental measurements of the antenna made to validate the simulations. The results show that a microstrip antenna with PPy as the ground plane provides a gain of 4.1 dB at 10.5 GHz as against 5.35 dB for copper ground plane at 11 GHz.

Keywords

antenna radiation patterns; conducting polymers; microstrip antennas; bulk conductivity level; conducting polymer; copper ground plane antenna; frequency 10.5 GHz; frequency 11 GHz; gain 4.1 dB; microstrip antenna; microstrip patch antenna; polypyrrole ground plane; radiation pattern; return loss; Antenna measurements; Conductivity; Copper; Frequency measurement; Gain measurement; Loss measurement; Microstrip antennas; Patch antennas; Polymers; Resonant frequency;

fLanguage

English

Publisher

ieee

Conference_Titel

Radar, 2008 International Conference on

Conference_Location

Adelaide, SA

Print_ISBN

978-1-4244-2321-7

Electronic_ISBN

978-1-4244-2322-4

Type

conf

DOI

10.1109/RADAR.2008.4653960

Filename

4653960