Development of standard set for HF electrical field

Author

Shengxiang, Yang ; Dexiong, Xi ; Fan, Wu ; Hongxiang, Zhang ; Xiaoqing, Ma

Author_Institution

Nat. Inst. of Metrol., Beijing, China

fYear

2002

fDate

21-24 May 2002

Firstpage

62

Lastpage

66

Abstract

This paper describes the standard set for the HF electrical field, which was completed using the "standard electrical field method". The standard transmitting antenna consists of thirteen half-wave tuned dipole antennas, whose operating frequencies are different. The frequency range covers from 30 to 1000MHz. The transmitting field strength is 100-120 dBμV/m on the steel open area test site with dimensions of 40 m × 1.5 m. Uncertainty is less than 1dB. It was used for EMC test such as the metrology of electromagnetic field strength and the calibration of antenna factor.

Keywords

calibration; dipole antennas; electric field measurement; electromagnetic compatibility; measurement standards; radiofrequency interference; transmitting antennas; 30 to 1000 MHz; EMC; EMI; EMI receiver; HF electrical field standard; antenna factor calibration; electromagnetic field strength metrology; field strength meter; half-wave tuned dipole antennas; operating frequency; standard electrical field method; standard transmitting antenna; steel open area test site; transmitting field strength; Dipole antennas; Electromagnetic compatibility; Frequency; Hafnium; Open area test sites; Standards development; Steel; Testing; Transmitting antennas; Uncertainty;

fLanguage

English

Publisher

ieee

Conference_Titel

Electromagnetic Compatibility, 2002 3rd International Symposium on

Print_ISBN

0-7803-7277-8

Type

conf

DOI

10.1109/ELMAGC.2002.1177363

Filename

1177363