Genetic algorithm based design of the active damping for a LCL-filter three-phase active rectifier

The use of a LCL-filter mitigates the switching ripple injected in the grid by a three-phase active rectifier. However stability problems could arise in the current control loop. In order to overcome them a damping resistor can be inserted, at the price of a reduction of the efficiency. On the contrary the use of the active damping seems really attractive but it is often limited by the use of more sensors respect to the standard control and by the complex tuning procedure. This paper introduces a new active damping method that does not need the use of more sensors and that can be tuned using genetic algorithms. It consists of adding a filter on the reference voltage for the converter´s modulator. The tuning process of this filter is easily done, for a wide range of sampling frequencies, with the use of genetic algorithms. This method is used only for the optimum choice of the parameters of the filter and an on-line implementation is not needed. Thus the resulting active damping solution does not need new sensors or complex calculations. Moreover, in the paper particular attention is devoted to the dynamics of the system due to the introduction of the active damping.