Design comparison of 6.5 kV Si-IGBT, 6.5kV SiC JBS diode, and 10 kV SiC MOSFETs in megawatt converters for shipboard power system

In this paper a comparative design study has been shown with 6.5kV Si-IGBT/Si-P IN diode, 6.5kV Si-IGBT/SiC-JBS diode, and 10kV SiC-M OSFET/SiC-JBS diode in an act ive front-end (AFE) converter for medium-voltage shipboard application. Megawatt converters based on the aforementioned technologies are being designed and compared at tw o different switching frequencies. In this regard, accurate circuit models for 5-10A die for each (a) silicon 6.5kV IGBT, (b) 6.5kV Si-IGBT incorporating a 6.5kV SiC-JB S Diode, and (c) 10kV SiC MOSFET with 10kV SiC JBS Diode, are paralleled to ma ke a 100A switch and used as conv erter switching devices in SPICE circuit simulation to perform the comparative analysis. Switching waveforms, characteristics, switching power and energy loss measurements are follo wed by an efficiency comparison of a 1MW converter with 7.5kVdc at 1kH z and 5kH z switching frequencies. It is shown that 6.5kV Si-IGBT/SiC-JBS diode, with its high efficiency performance up to 5kHz, is a strong candidate for MW ran ge converters. The 10kV SiC-MOSFET/SiC-JBS diode is an option for h igher switching frequency MW converters.