RAPOSA: Semi-Autonomous Robot for Rescue Operations

This work describes a semi-autonomous robot for rescue operations, nicknamed RAPOSA (FOX in English). The robot was designed and built to operate in outdoor environments hostile to the human presence, such as debris resulting from the collapse of built structures, and is targeted to the tele-operated detection of potential survivors using a set of specific sensors whose information is transmitted to a remote human operator. RAPOSA´s mechanical structure is composed of a main body and a front body, whose locomotion is supported on tracked wheels, allowing motion even when the robot is upside down. The front body has variable tilting capabilities, providing means to overcome edges higher than the robot main body (e.g., when climbing a stair) and is also useful to grab the lower ground when only the main body has ground contact. This front body has one thermal camera and two web cameras installed. Additional sensors include gas, temperature and humidity sensors, Web cams, light diodes, microphone and loudspeaker. The robot uses wireless communications, with an option for tethered operation. The tether carries both power and communications, with an access point on its end, and can also be used to suspend the robot inside a deep hole. Docking and undocking the robot to the tether is accomplished remotely by the operator with the help of a camera located inside the robot, and represents the most innovative feature of RAPOSA