DocumentCode :
3189084
Title :
A 2 GHz Polypyrrole microstrip patch antenna on Plexiglas substrate
Author :
Verma, Akhilesh ; Fumeaux, Christophe ; Truong, Van-Tan ; Bates, Bevan D.
Author_Institution :
Sch. of Electr. & Electron. Eng., Univ. of Adelaide, Adelaide, SA, Australia
fYear :
2009
fDate :
7-10 Dec. 2009
Firstpage :
36
Lastpage :
39
Abstract :
A microstrip patch antenna (MPA) has been fabricated using a conducting polymer (CP), polypyrrole (PPy) as radiating patch on a transparent 3 mm thick PlexiglasTM substrate. The bulk DC conductivity of the PPy patch is 2000 S/m and its thickness 120 μm. The MPA was designed for operating at 2 GHz. A similar antenna with copper (Cu) patch on PlexiglasTM was also fabricated for validating the simulation of PPy antenna and comparing its performance. The results show that the PPy antenna reaches a gain of 5.01 dB at 2.18 GHz as against 6.26 dB at 2.2 GHz for a corresponding Cu patch antenna. The conduction efficiency of Cu-patch antenna is around 80% while that of PPy-patch antenna is around 60%. The results suggest that it might be possible to use CPs in other passive microwave circuit applications.
Keywords :
UHF antennas; conducting polymers; copper; microstrip antennas; Cu; Plexiglas substrate; bulk DC conductivity; conducting polymer; frequency 2 GHz; frequency 2.18 GHz; gain 5.01 dB; passive microwave circuit; polypyrrole microstrip patch antenna; size 120 μm; size 3 mm; Australia; Chemical technology; Conducting materials; Conductivity; Copper; Electrons; Microstrip antennas; Optical materials; Patch antennas; Polymer films; Conducting Polymer; Microstrip Patch Antenna;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Microwave Conference, 2009. APMC 2009. Asia Pacific
Conference_Location :
Singapore
Print_ISBN :
978-1-4244-2801-4
Electronic_ISBN :
978-1-4244-2802-1
Type :
conf
DOI :
10.1109/APMC.2009.5385500
Filename :
5385500
Link To Document :
بازگشت