Performance of Tesla Cavities after Fabrication and Preparation in Industry

In order to demonstrate cw operation of TESLA cavities in a linear accelerator driven FEL application, two TESLA cavities were manufactured for BESSY. After production, both cavities were prepared for vertical test at ACCEL’s premises using state of the art chemical polishing and high pressure water rinsing techniques. The cavities were tested in DESY’s vertical RF test installation. Accelerating gradients close to 25 MV/m were reached. One cavity was completed with helium vessel modified for cw operation, prepared with chemical polishing and high pressure water rinsing and assembled with the required high power coupler at ACCEL. The fully dressed cavity was then shipped under vacuum to BESSY and is currently under test in the horizontal cryostat HoBiCaT.