• DocumentCode
    3235722
  • Title

    Detailed analysis of FIBL in MOS transistors with high-k gate dielectrics

  • Author

    Mohapatra, Nihar R. ; Desai, Madhav P. ; Rao, V. Ramgopal

  • Author_Institution
    Dept. of Electr. Eng., Indian Inst. of Technol., Bombay, India
  • fYear
    2003
  • fDate
    4-8 Jan. 2003
  • Firstpage
    99
  • Lastpage
    104
  • Abstract
    This paper analyzes in detail the fringing induced barrier lowering (FIBL) in MOS transistors with high-k gate dielectrics using 2D device simulations. We found that the device short channel performance is degraded with increase in gate dielectric permittivity (Kgate) due to an increase in the dielectric physical thickness to channel length ratio. For Kgate greater than Ksi, we observe a substantial coupling between source and drain regions through the gate insulator. This fact is validated by extensive device simulations with different channel length and overlap length over a wide range of dielectric permittivities. We also observe that the overlap length is an important parameter for optimizing DC performance in short channel MOS transistors. The effect of stacked gate dielectric and lateral channel engineering on the performance of high-k gate dielectric MOS transistors is also studied to substantiate the above observations.
  • Keywords
    MOSFET; dielectric thin films; permittivity; semiconductor device models; FIBL; MOS transistors; channel length; device short channel performance; dielectric thickness/channel length ratio; fringing induced barrier lowering; gate dielectric permittivity; gate insulator; high-k gate dielectrics; lateral channel engineering; overlap length; source drain region coupling; stacked gate dielectric; Analytical models; Degradation; Dielectric devices; Dielectric materials; Dielectrics and electrical insulation; High K dielectric materials; High-K gate dielectrics; MOSFETs; Medical simulation; Physics;
  • fLanguage
    English
  • Publisher
    ieee
  • Conference_Titel
    VLSI Design, 2003. Proceedings. 16th International Conference on
  • ISSN
    1063-9667
  • Print_ISBN
    0-7695-1868-0
  • Type

    conf

  • DOI
    10.1109/ICVD.2003.1183121
  • Filename
    1183121