DocumentCode :
3262892
Title :
Impact of punching on a small induction motor
Author :
Mach, M. ; Hajek, V.
Author_Institution :
Dept. of Power Electr. & Electron. Eng., Brno Univ. of Technol., Brno, Czech Republic
fYear :
2015
fDate :
10-13 June 2015
Firstpage :
895
Lastpage :
900
Abstract :
This article deals with impact of punching processes on a small induction motor performance. Attempt to estimate shape of BH curve in areas damaged by punching is present here. To the estimation, simulations by the finite elements method together with laboratory measurement are used. The effect of punching is studied due to measurement of two samples of a small induction motors. First sample is a serial produced motor and second sample is the same motor except that sheets of its magnetic circuit were annealed after punching. The negative impact of punching can be eliminated by annealing. The results of both laboratory measurements and FEM simulations of the both motors are presented in this article.
Keywords :
finite element analysis; induction motors; magnetic circuits; finite elements method; magnetic circuit; serial produced motor; small induction motor; Annealing; Current measurement; Induction motors; Integrated circuit modeling; Magnetic circuits; Magnetic properties; Punching; FEM simulation; annealing; efficiency; induction machine; manufacturing process; punching;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Environment and Electrical Engineering (EEEIC), 2015 IEEE 15th International Conference on
Conference_Location :
Rome
Print_ISBN :
978-1-4799-7992-9
Type :
conf
DOI :
10.1109/EEEIC.2015.7165282
Filename :
7165282
Link To Document :
بازگشت