A latching acceleration switch with cylindrical contacts independent to the proof-mass

Author

Guo, Z.Y. ; Yang, Z.C. ; Lin, L.T. ; Zhao, Q.C. ; Ding, H.T. ; Liu, X.S. ; Chi, X.Z. ; Cui, J. ; Yan, G.Z.

Author_Institution

Nat. Key Lab. of Micro/Nano Fabrication Technol., Peking Univ., Beijing, China

fYear

2009

fDate

25-28 Oct. 2009

Firstpage

1282

Lastpage

1285

Abstract

A latching acceleration switch with cylindrical contacts is presented in this paper. The cylindrical contacts can make the switch immune to the fabrication imperfection and off sensitive axis shocks, as well as decrease the contact resistance. Moreover, all the contacts and their beams are separated from the proof-mass so as to prevent the contacts from the impact resulting from the rebound or vibration of the proof mass once the switch is latched. The switch was fabricated by low-cost process and tested. The measured latching shock is 4500 G and the response time is less than 0.1 ms. The total on-resistance is less than 3 ohms while the insulation resistance is more than 200 M ohms and the maximum allowable current is up to 130 mA.

Keywords

electrical contacts; time switches; contact resistance; cylindrical contacts; fabrication imperfection; insulation resistance; latching acceleration switch; latching shock; low-cost process fabrication; response time; sensitive axis shocks; total on-resistance; Acceleration; Contact resistance; Delay; Electric shock; Electrical resistance measurement; Fabrication; Insulation; Switches; Testing; Time measurement;

fLanguage

English

Publisher

ieee

Conference_Titel

Sensors, 2009 IEEE

Conference_Location

Christchurch

ISSN

1930-0395

Print_ISBN

978-1-4244-4548-6

Electronic_ISBN

1930-0395

Type

conf

DOI

10.1109/ICSENS.2009.5398389

Filename

5398389