DocumentCode :
334339
Title :
Linac design for the LCLS project at SLAC
Author :
Bharadwaj, V.K. ; Bane, K. ; Clendenin, J. ; Emma, P. ; Sheppard, J.C. ; Woodley, M.D.
Author_Institution :
Linear Accel. Center, Stanford Univ., CA, USA
Volume :
1
fYear :
1997
fDate :
12-16 May 1997
Firstpage :
903
Abstract :
The Linac Coherent Light Source (LCLS) at SLAC is being designed to produce intense, coherent 0.15-nm X-rays. These X-rays will be produced by a single pass of a 15 GeV bunched electron beam through a long undulator. Nominally, the bunches have a charge of 1 nC, normalized transverse emittances of less than 1.5π mm-mr and an rms bunch length of 20 μm. The electron beam will be produced using the last third of the SLAC 3-km linac in a manner compatible with simultaneous operation of the remainder of the linac for PEP-II. The linac design necessary to produce an electron beam with the required brightness for LCLS is discussed, and the specific linac modifications are described
Keywords :
electron accelerators; linear accelerators; particle beam bunching; wigglers; 15 GeV; LCLS project; Linac Coherent Light Source; PEP-II; SLAC; bunched electron beam; linac design; long undulator; normalized transverse emittances; specific linac modifications; Acceleration; Electron beams; Lattices; Linear accelerators; Linear particle accelerator; Optical design; Radio frequency; Stimulated emission; Undulators; X-rays;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Particle Accelerator Conference, 1997. Proceedings of the 1997
Conference_Location :
Vancouver, BC
Print_ISBN :
0-7803-4376-X
Type :
conf
DOI :
10.1109/PAC.1997.749876
Filename :
749876
Link To Document :
بازگشت