The design for high power density in the slotless type permanent magnet linear synchronous motor

Author

Dong-Yeup, Lee ; Gyu-Tak, Rim ; Jung-Keying, Choi

Author_Institution

Dept. of Electr. Eng., Changwon Nat. Univ., South Korea

fYear

2005

fDate

4-8 April 2005

Firstpage

653

Lastpage

654

Abstract

In this paper, the power density is increased with a method of inserting core between windings of each phase of slotless PMLSM model. By inserting core, detent force is generated due to dispersion of air gap magnetic reluctance. Thrust ripples are generated due to that detent force. Therefore, we proposed the method of dividing permanent magnet (PM) in order to reduce the higher harmonics of the magnetic flux. Also. to increase the low thrust by dividing PM, the optimum design of stator is progressed. Throguh 2-D finite element analysis (FEA), the characteristic analysis were computed. Also, through the analysis of harmonic component of thrust, the removal of specific harmonic component of thrust and the reduction of detent force were confirmed.

Keywords

cores; finite element analysis; linear synchronous motors; machine windings; permanent magnet motors; 2D finite element analysis; FEA; air gap magnetic reluctance; detent force; dividing permanent magnet; harmonic component; high power density; inserting core; magnetic flux; slotless type permanent magnet linear synchronous motor; stator; thrust ripples; windings; Distributed power generation; Finite element methods; Harmonic analysis; Magnetic analysis; Magnetic cores; Magnetic flux; Permanent magnets; Reluctance generators; Stators; Synchronous motors;

fLanguage

English

Publisher

ieee

Conference_Titel

Magnetics Conference, 2005. INTERMAG Asia 2005. Digests of the IEEE International

Print_ISBN

0-7803-9009-1

Type

conf

DOI

10.1109/INTMAG.2005.1463755

Filename

1463755