Using geometric accuracy of TerraSAR-X data for improvement of direct sensor orientation and ortho-rectification of optical sattelite data

The very high geometric accuracy of geocoded data of the TerraSAR-X satellite has been shown in several investigations. It is due to the fact that it measures distances which are mainly dependent on the position of the satellite and the terrain height. If the used DEM is of high accuracy, the resulting geocoded data are very precise. This precision can be used to improve the exterior orientation and thereby the geometric accuracy of optical satellite data. The technique used is the measurement of identical points in the images, either by manual measurements or through local image matching using mutual information and to estimate improvements for the attitude data through this information. By adjustment calculations falsely matched points can be eliminated and an optimal improvement can be found. The optical data are orthorectified using these improvements and the available DEM. The results are compared using conventional ground control information from GPS measurements.