Title :
Fabrication technique for over 10 microns thick ferrite particulate film at room temperature
Author :
Hashi, S. ; Takada, N. ; Nishimura, K. ; Sakurada, O. ; Yanase, S. ; Okazaki, Y. ; Inoue, M.
Author_Institution :
Dept. of Mater. Sci. & Technol., Gifu Univ., Japan
Abstract :
The preparation of Ni-Zn ferrite particulate films by electrophoretic deposition (EPD) from an aqueous solution at room temperature was studied. The vibrating sample magnetometer (VSM) was used to measure the magnetic properties of the films. The film´s structure was examined by X-ray diffractometer (XRD) using Cu-Kα radiation. Also, the surface morphology was observed by scanning electron microscope (SEM).
Keywords :
X-ray diffraction; electrophoretic coating techniques; ferrites; magnetic particles; magnetic thin films; nickel compounds; scanning electron microscopy; surface morphology; zinc compounds; 293 to 298 K; Ni-Zn ferrite particulate films; NiZnFe2O4; SEM; X-ray diffractometer; XRD; electrophoretic deposition; magnetic properties; scanning electron microscope; surface morphology; vibrating sample magnetometer; Fabrication; Ferrite films; Magnetic films; Magnetic properties; Magnetometers; Scanning electron microscopy; Temperature; Vibration measurement; X-ray diffraction; X-ray scattering;
Conference_Titel :
Magnetics Conference, 2005. INTERMAG Asia 2005. Digests of the IEEE International
Print_ISBN :
0-7803-9009-1
DOI :
10.1109/INTMAG.2005.1464178
