Title :
The printed Surface Acoustic Wave filter with inkjet technology
Author :
Yang Cao ; Kun Li ; Jianfu Teng ; Xiuwei Xuan
Author_Institution :
Tianjin Key Lab. of Film Electron. & Commun. Device, Tianjin Univ. of Technol., Tianjin, China
Abstract :
In this paper, it is proposed to apply Printed Electronics (PE) technology to manufacture the Surface Acoustic Wave (SAW) filter. Traditional manner to manufacture the SAW filter is with microelectronic process, which is complicated and very expensive. Furthermore, some wastewater and waste gas would be produced. On the contrary, the PE technology is much simple, affordable and environmental friendly. In our work, an SAW filter is manufactured with nano silver ink and inkjet printing technology. The experiment results show that the center frequency of the pass-band is 18.4MHz, and that the bandwidth is 500 KHz.
Keywords :
ink jet printing; integrated circuits; surface acoustic wave filters; wastewater; SAW filter; bandwidth 0.5 MHz; frequency 18.4 MHz; inkjet printing technology; inkjet technology; microelectronic process; nanosilver ink; printed electronics technology; printed surface acoustic wave filter; waste gas; wastewater; Band-pass filters; Ink; Printing; SAW filters; Silver; Substrates; Surface acoustic waves; bandpass filter; inkjet printing; nano silver ink; printed electronics (PE); surface acoustic wave (SAW);
Conference_Titel :
Electron Devices and Solid-State Circuits (EDSSC), 2014 IEEE International Conference on
DOI :
10.1109/EDSSC.2014.7061186
