Beam position monitors for the SNS linac

The Spallation Neutron Source (SNS) linac accelerates 52-mA peak of pulsed H- particles to over 800 MeV. There are three types of accelerating structure in which the beam position must be measured: the drift-tube-linac (DTL); cavity-coupled-linac (CCL); and superconducting-linac (SCL)[1, 2]. Beam with a 402.5-MHz structure is injected into a 402.5 MHz DTL, followed by 805-MHz CCL and SCL structures. The position monitor pickups are all of the shorted-microstrip type with apertures of 2.5-cm, 3-cm and 7.3-cm-dia. In all cases, we down convert signals from the beam position pickups to a 50-MHz intermediate frequency (IF) for processing. We use the sampled in-phase and quadrature-phase (I&Q) processing technique to obtain the amplitude and phase information of the IF signals. All of the electronics are PCI-based hardware installed in PC computers employing standard technologies. LabVIEW^TM is used for all of the acquisition, processing, and serving of the data to ethernet, and hence, the control system. The design of this beam position system hardware is described herein