A 132dB DR readout IC with pulse width modulation for IR focal plane arrays

Author

Chia-Chi Kuo;Chih-Cheng Hsieh

Author_Institution

Signal Sensing and Application Lab. (SiSAL) Department of Electrical Engineering, National Tsing Hua University, Taiwan

fYear

2015

Firstpage

1

Lastpage

4

Abstract

A 1.5V(A)/0.8V(D) high dynamic range (HDR) readout integrated circuit (ROIC) with tunable sensitive range and fixed pattern noise (FPN) reduction for infrared focal plane arrays (IR FPAs) is presented. A pulse width modulation (PWM) readout with capacitive trans-impedance amplifier (CTIA) front end, dual-exposure extended-counting (DEEC) [1], and aligned time-control ramp (ATCR) generator are developed for dynamic range boost. Auto-zeroing and offset cancellation (AZOC) mechanisms are implemented to reduce readout noise and FPN. The digital supply voltage of logic part is decreased to 0.8V for power reduction. The ROIC prototype with an embedded test CMOS image sensor array of 64×64 and 15μm×15μm pixel pitch has been designed and fabricated in 0.18μm CMOS technology. The experimental results show an achieved high dynamic range of 132dB, a FPN in dark of 0.02%, a frame rate of 230fps, and an iFOM of 1.27 nW/frame.pix at 1.5V(A)/0.8V(D) operation.

Keywords

"Pulse width modulation","Generators","Dynamic range","CMOS integrated circuits","Lighting","Radiation detectors","Timing"

Publisher

ieee

Conference_Titel

Solid-State Circuits Conference (A-SSCC), 2015 IEEE Asian

Type

conf

DOI

10.1109/ASSCC.2015.7387502

Filename

7387502