Fermilab electron cooling project: field measurements in the cooling section solenoid

Author

Crawford, C. ; McCrory, E. ; Nagaitsev, S. ; Shemyakin, A. ; Bocharov, V. ; Bubley, A. ; Parkhomchuk, V. ; Tupikov, V. ; Seletsky, S.

Author_Institution

Fermi Nat. Accel. Lab., Batavia, IL, USA

Volume

1

fYear

2001

fDate

2001

Firstpage

195

Abstract

To provide the maximum possible cooling rate for the Recycler Electron Cooling (REC), the cooling section has to be immersed into a high-quality longitudinal magnetic field. Namely, the solenoidal field of 50-150 G should have an integral of the transverse component below 1 G-cm over the whole 20-m cooling section. The transverse field components are measured by a dedicated compass-based sensor, which has been designed and manufactured at Budker INP, Novosibirsk. The paper describes results of the field measurements performed on the cooling section solenoid prototypes as well as the design and the calibration procedure of the sensor

Keywords

accelerator magnets; calibration; electromagnets; electron accelerators; particle beam diagnostics; solenoids; storage rings; 20 m; 50 to 150 G; Fermilab electron cooling project; REC; Recycler Electron Cooling; calibration procedure; compass-based sensor; cooling section solenoid; field measurements; high-quality longitudinal magnetic field; solenoid prototypes; transverse component; Calibration; Cooling; Electrons; Indium phosphide; Magnetic field measurement; Magnetic sensors; Manufacturing; Performance evaluation; Prototypes; Solenoids;

fLanguage

English

Publisher

ieee

Conference_Titel

Particle Accelerator Conference, 2001. PAC 2001. Proceedings of the 2001

Conference_Location

Chicago, IL

Print_ISBN

0-7803-7191-7

Type

conf

DOI

10.1109/PAC.2001.987468

Filename

987468