• DocumentCode
    528780
  • Title

    A 5V output voltage boost switching converter with hybrid digital and analog PWM control

  • Author

    Lu, Chien-Chun ; Kuo, Ming-Ching

  • Author_Institution
    Information and Communications Research, Laboratories, Industrial Technology Research Institute, Hsinchu, Taiwan
  • fYear
    2010
  • fDate
    18-20 Aug. 2010
  • Firstpage
    99
  • Lastpage
    104
  • Abstract
    This paper proposes a Boost DC-DC switching converter with a 5V output voltage. By operating in CCM mode, it combines a digital pulse width modulator (DPWM) with a conventional analog pulse width modulator to enhance the input range and reduce the inductor inrush current greatly. With the DPWM technique, the boost converter can operate at an input voltage from 1.2V to 4.2V, while generating a output voltage up to 5V in TSMC 0.25um 5.0V CMOS technology. The measured peak efficiency of the switching converter is up to 97%.
  • Keywords
    Batteries; Converters; Current measurement; Pulse width modulation; Surges; Voltage control; Voltage measurement; Boost; Switching Converter and Digital PWM;
  • fLanguage
    English
  • Publisher
    ieee
  • Conference_Titel
    Low-Power Electronics and Design (ISLPED), 2010 ACM/IEEE International Symposium on
  • Conference_Location
    Austin, TX, USA
  • Print_ISBN
    978-1-4244-8588-8
  • Type

    conf

  • Filename
    5598993
    • Link To Document
    https://search.isc.ac/dl/search/defaultta.aspx?DTC=49&DC=528780