DocumentCode :
746545
Title :
Si-OEIC with a built-in PIN-photodiode
Author :
Yamamoto, Motohiko ; Kubo, Masaru ; Nakao, Kazuhira
Author_Institution :
Dept. of Eng., Sharp Corp., Tenri, Japan
Volume :
42
Issue :
1
fYear :
1995
fDate :
1/1/1995 12:00:00 AM
Firstpage :
58
Lastpage :
63
Abstract :
A Si-OEIC with a built-in PIN-photodiode has been developed by a new device structure. We have successfully fabricated an optical link receiver with a speed of 50 Mb/s. The new device structure consists of stacked epitaxial layers each with a buried diffusion region. The cutoff frequency of the photodiode thus realized is 300 MHz and the fall time is 1.6 ns. In this paper, the structure of this new device is presented along with its fabrication process, while the performance is analyzed using device simulation. It was found that the speed of the PIN-photodiode in the Si-OEIC is dominated by carrier transit time in the n+-buried region. Further investigation was made by device simulation on two advanced structures. The speed of response of PIN-photodiode will be improved to as fast as 1 ns by the current Si technology. By more advanced technology, 0.7 ns will be achieved for the fall time showing the ultimate characteristic of Si-OEIC
Keywords :
elemental semiconductors; integrated circuit modelling; integrated optoelectronics; optical receivers; p-i-n photodiodes; silicon; simulation; 0.7 to 1.6 ns; 300 MHz; 50 Mbit/s; Si; Si OEIC; built-in PIN-photodiode; buried diffusion region; carrier transit time; device simulation; fabrication process; n+-buried region; optical link receiver; response speed; stacked epitaxial layers; Bipolar integrated circuits; Cutoff frequency; Epitaxial layers; Fabrication; Microcomputers; Optical fiber communication; Optical receivers; Optical signal processing; Photodiodes; Signal processing;
fLanguage :
English
Journal_Title :
Electron Devices, IEEE Transactions on
Publisher :
ieee
ISSN :
0018-9383
Type :
jour
DOI :
10.1109/16.370035
Filename :
370035
Link To Document :
بازگشت