Wave equation-based imaging of mode converted waves in ultrasonic NDI, with suppressed leakage from nonmode converted waves

The value of imaging techniques in ultrasonic nondestructive inspection (NDI) to find and characterize defects in steel components has already been demonstrated. The imaging techniques based on the integral representation of the wave equation, the Rayleigh integrals for wave field extrapolation, are becoming feasible and attractive due to advances in array technology and due to faster computers. Known implementations are the total focusing method (TFM), the synthetic aperture focusing method (SAFT), and the inverse wave field extrapolation method (IWEX). In principle, these techniques compensate propagation effects from sources to a scatterer such as a defect and propagation effects from the scatterer to receivers. Currently, this approach is applied to wave fronts of single modes (pure longitudinal or pure transversal). In practice, multiple wave fronts from the scatterer will be received as a result of mode conversion. These arrivals will not have the same arrival time because of the difference in sound velocity between longitudinal and transversal waves. Images of mode converted waves are obtained by choosing the appropriate sound velocity that corresponds with the mode-converted scattered wave in the imaging process. Therefore, the nonmode converted waves will image as leakage artifacts in the mode-converted images, and vice versa. This may lead to false interpretations. In this paper, such artifacts will be identified and explained with the help of an analytical example. Measurements from steel test pieces with a 4 MHz linear array transducer with 64 elements will be used to demonstrate the artifacts. Furthermore, a procedure to predict the artifacts and the subsequent suppression from the input measurements will be presented and demonstrated.