Very small IF resonator filters using reflection of shear horizontal wave at free edges of substrate

A conventional surface acoustic wave (SAW) resonator filter requires reflectors consisting of numerous grating fingers on both sides of interdigital transducers (IDTs). On the contrary, it is considered that small-sized and low loss resonator filters without reflectors consisting of grating fingers can be realized by exploiting this characteristic of the shear horizontal (SH) wave or the Bleustein-Gulyaev-Shimizu (BGS) wave. There are two types of resonator filters: transversely coupled and longitudinally coupled. No transversely coupled filters (neither conventional nor edge-reflection) using the SH wave on a single-crystal substrate have been realized until now, because two transverse modes (symmetrical and asymmetrical modes) are not easily coupled. However, the authors have realized small low loss transversely coupled resonator filters in the range of 25 to 52 MHz using edge reflections of the BGS wave on piezoelectric ceramic (PZT: Pb(Zr,Ti)O/sub 3/) substrates for the first time by developing methods by which the two transverse modes could be coupled. Also the authors have realized small low loss longitudinally coupled resonator filters in the range of 40 to 190 MHz using edge reflection of BGS or SH waves on PZT or 36/spl deg/-rotated-Y X-propagation LiTaO/sub 3/ substrates for the first time. Despite being IF filters, their package (3/spl times/3/spl times/1.03 mm/sup 3/) sizes are as small as those of RF SAW filters.