Ultra-high-field magnets for future hadron colliders

Author

McIntyre, P.M. ; Weijun Shen ; Scanlan, R.M.

Author_Institution

Dept. of Phys., Texas A&M Univ., College Station, TX, USA

Volume

5

Issue

2

fYear

1995

fDate

6/1/1995 12:00:00 AM

Firstpage

1099

Lastpage

1102

Abstract

Several new concepts in magnetic design and coil fabrication are being incorporated into designs for ultra-high field collider magnets: a 16 Tesla block-foil dual dipole, also using Nb/sub 3/Sn cable, featuring simple pancake coil construction and face-loaded prestress geometry; a 330 T/m block-coil quadrupole; and a /spl sim/20 Tesla pipe-geometry dual dipole, using A15 or BSCCO tape. Field design and fabrication issues are discussed for each magnet.<>

Keywords

accelerator magnets; colliding beam accelerators; electron device manufacture; superconducting cables; superconducting coils; superconducting magnets; superconducting tapes; 16 T; 20 T; A15 tape; BSCCO tape; BiSrCaCuO; Nb/sub 3/Al; Nb/sub 3/Sn; Nb/sub 3/Sn cable; block-coil quadrupole; block-foil dual dipole; face-loaded prestress geometry; hadron colliders; pancake coil construction; pipe-geometry dual dipole; superconducting coil fabrication; superconducting magnet design; superconducting tapes; ultra-high-field magnets; Colliding beam devices; Costs; Fabrication; Geometry; Magnetic flux; Packaging; Stress; Structural beams; Superconducting coils; Superconducting magnets;

fLanguage

English

Journal_Title

Applied Superconductivity, IEEE Transactions on

Publisher

ieee

ISSN

1051-8223

Type

jour

DOI

10.1109/77.402743

Filename

402743